Table of Contents
Advertisement
REMARKS
Maintaining Your Machine
If the exposure glass or document feeder belt is dirty, you might not be able to
make copies as you want. Clean them if you find them dirty.
Cleaning the machine
Wipe the machine with a soft, damp cloth. Then, wipe it with a dry cloth to
remove the water.
Important
Do not use chemical cleaner or organic solvent, such as thinner or benzene. If
they get into the machine or melt plastic parts, a failure might occur.
Do not clean parts other than those specified in this manual. Such parts
should be cleaned by your service representative.
Cleaning the Exposure Glass
7
Cleaning the Document Feeder
338
ND1C0200
A1P0100E
Advertisement
Table of Contents
