2.1
Software installation and setup
2.1.1. System requirements
The purpose of this document is to describe the installation of the "SmartLine Modbus
Manager", a PC based application used to configure SMV Modbus transmitter
The Following are the minimum system requirements to install the Modbus Host:
Microsoft® Windows™ Operating System (32- bit or 64-bit) as given below.
Windows 7
Windows 8.1
Windows 10
Windows server 2012
Windows Server 2016
Recommended to use Isolated USB-RS485 modem hardware and it's driver for
USB modem option
Proper Execution of host requires a standard PC with at least following resources:
o 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
o 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
o Screen Resolution at least 1280x1024, 1280x960, 1280x800 pixels
2.1.2. Hard Disk Space:
The Modbus Host requires minimum 250MB Hard Disk space.
2.1.3. Downloads
Download: Honeywell PC based Modbus Host application " SmartLine Modbus Manager" from
HPS websites given below
https://www.honeywellprocess.com/all-downloads.aspx
and
https://www.honeywellprocess.com/smartline-smv800-multivariable-transmitter.aspx
Page 4
2. Configuration
SMV800 Modbus User's Guide
Revision 1.0