4. The compare configuration screen will be displayed as shown below.
In the above screen, click Browse button to get the files to compare by browsing it
from different location.
Here the File1 and File2 are the last and currently saved configuration files respectively
by the user.
Before start comparing the files, the Compare button will be disabled and once the files
are selected for comparison, the button will be enabled, to perform the comparison
operation.
The selected File1 and File2 should have the same structure of the files. If there is any
invalid file is used for comparison, "Browse the appropriate file for comparison"
message will be displayed from the application.
Once the valid files are selected and compared, the results as part of the comparison
will be shown as given in the below screen.
Page 102
SMV800 Modbus User's Guide
Revision 1.0