Honeywell SMV800 User Manual page 78

Tx Electronics Selections
Configuration Selections
Accuracy & Calibration
Accessory Selections
Certifications & Warranty
Factory Identification
Page 66
Electronic Housing Material
Connection Type
Lightning Protection
Analog Output
Digital Protocol
Customer Interface
Indicator
Ext Zero, Span & Config
Buttons
Languages
Diagnostics
Write Protect
Failsafe
Hi & Lo Output Limits
General Configuration
Accuracy
Calibrated Range
Calibration Type
Mounting Bracket Type
Mounting Bracket Material
Customer Tag
Unassembled Conduit
Plugs & Adapters
SMV800 Modbus User's Guide
Material of construction for the electronics
housing
Size/type of wiring conduit ports on the
housing
Identifies if lightning protection is installed
Identifies the availability of Analog Output
Identifies the device Digital
Communications Protocol (HART, DE,
Modbus)
Identifies the type of Display available
(None or Advanced)
Identifies the selection of external
calibration buttons available
Identifies the selection of languages
available via the Display and
communications hosts
Standard Diagnostics is the only selection
available
Identifies the hardware write protect
configuration ordered with the device (On
or Off)
Identifies the analog failsafe configuration
ordered with the device (High or Low
burnout)
Identifies the configured high and low
analog output range (Standard or Namur)
Identifies the configuration ordered with the
device (standard configuration or custom)
Only Standard Accuracy is available
Identifies the factory calibration selection
ordered for this device (Standard factory
calibration or custom range) for the three
process inputs (Differential Pressure, Static
Pressure, Process Temperature)
Identifies the number of custom factory
calibrations ordered for this device (single,
dual, or triple custom calibrations are
available for Differential and Static
Pressure inputs)
Identifies the shape (angle or flat) of the
device mounting bracket ordered with the
device
Identifies the material of construction of the
device mounting bracket ordered with the
device
Identifies the number of identification tags
ordered for this device (none, one or two)
Identifies the size, quantity and material of
any unassembled conduit plugs and
adapters ordered with this device
Lists all special certifications and
warranties ordered with this device
Identifies the location of the factory for
manufacturing this device
Revision 1.0