Honeywell SMV800 User Manual page 67

Temperature Failsafe (PV3)
continued
Simulation
Simulate Differential
Pressure
Simulate Static Pressure
Simulate Temperature
Simulate Mass Flow
Revision 1.0
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SMV800 Modbus User's Guide
Default / Nominal Temperature.
Fluid = Steam: Flow equation Uses
Design Density.
Design Temperature = 1.
SMV3000 or SMV800 Dynamic:
Fluid = Gas, Liquid, Steam:
Flow equation uses Nominal/Default
Temperature
User enters the values as selected in
Unit Configuration screen
User enters the values as selected in
Unit Configuration screen
User enters the values as selected in
Unit Configuration screen
User enters the values as selected in
Unit Configuration screen
Page 55