Table 2-2: Pre-Programmed Engineering Units For Sp - Honeywell SMV800 User Manual

SP Engineering Units
The Static Pressure Config tab displays the Lower Range Value (LRV), Lower Range Limit (LRL),
Upper Range Value (URV) and Upper Range Limit (URL) for SP in the unit of measure selected in the
Engineering Units field.

Table 2-2: Pre-programmed Engineering Units for SP*

Engineering Unit
inH2O @ 39F
inH2O @ 68F
mmHg @ 0C
psi d
kPa
M Pa
mbar
Bar
g/cm
Kg/cm
inHg @ 32F
mmH2O @ 4C
mH2O @ 4C
ATM
inH2O @ 60F
* Static pressure may be absolute or gauge pressure, depending on the SMV model type.
NOTE: Depending on the SMV transmitter model type, SP will measure static pressure in either
absolute or gauge values.
SMV Models - SMA810 and SMA845
-SMG870
SP Engineering Units. Select one of the preprogrammed engineering units in
the SP measurements.
Revision 1.0
Meaning
Inches of Water at 39.2 °F (4 °C)
Inches of Water at 68 °F (20 °C)
Millimeters of Mercury at 0°C (32 °F)
Pounds per Square Inch
Kilopascals
Megapascals
Millibar
Bar
2
Grams per Square Centimeter
2
Kilograms per Square Centimeter
Inches of Mercury at 32 °F (0 °C)
Millimeters of Water at 4°C (39.2 °F)
Meters of Water at 4 °C (39.2 °F)
Normal Atmospheres
Inches of Water at 60 °F (15.6 °C)
SP —Absolute Pressure
SP —Gauge Pressure
SMV800 Modbus User's Guide
Table 2-2
for display of
Page 21