Honeywell SMV800 User Manual page 25

2.3.2. Local Display:
This tab provides the detail information about the local display.
Refer the below table for Local Display Configuration:
Local display parameters
Display Setup Parameters
Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Display Connected
Display Type
Language Package
Common Setup
Revision 1.0
Language
Rotation Time
Screen Rotation
Contrast Level
SMV800 Modbus User's Guide
Identifies whether a Display is
connected to the
device
Identifies the type of Display connected
to the
device (only Advanced Display is
available for
SMV devices)
Identifies the language package
selected as Eastern or Western
Select the desired language to be used
for the Display.
Select the desired time delay for
switching between configured screens
(3 to 30 seconds)
Select to enable or disable screen
rotation.
Select the level of contrast for the
Display (default = 5, or select levels
1(low) to 9 (high))
Page 13