Fixing System; Location; Removing The Fixing Assembly - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure

Fixing System

Location

[1]
[3]
[4]
No. Parts Name Main Unit
[1] Fixing Assembly Product
Configuration
[2] Fixing Motor Product
Configuration
[3] Fixing Pressure Roller Fixing
Assembly
[4] Fixing Film Unit Fixing
Assembly
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure
[2]
F-4-512
Remarks Reference Adjustment
during parts
replacement
- (Refer to page 4-225) -
M703 (Refer to page 4-232) -
- (Refer to page 4-231) -
- (Refer to page 4-228) -
T-4-45

Removing the Fixing Assembly

■ Preparation
1) Remove the Right Cover. Refer to page 4-147.
2) Remove the Left Cover. Refer to page 4-144.
3) Remove the Rear Upper Cover. Refer to page 4-153.
4) Remove the Rear Lower Cover. Refer to page 4-154.
■ Procedure
CAUTION:
Take some time until the fixing assembly gets cooler and then remove it because the
fixing assembly right after the power supply is turned off is at high heat
1) Remove the Fixing Power Supply Cover [1].
• 2 screws [2]
x2
4-225
[1]
[2] [2]
F-4-513
4-225