Removing The Rear Cover Rib Unit - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > External Cover, Internal Cover > Removing the Rear Cover Rib Unit > Procedure

Removing the Rear Cover Rib Unit

■ Preparation
1) Remove the Right Cover. Refer to page 4-20.
2) Remove the Left Cover. Refer to page 4-17.
3) Remove the Rear Upper Cover. Refer to page 4-24.
4) Remove the Rear Cover. Refer to page 4-24
5) Remove the Rear Lower Cover. Refer to page 4-25
■ Procedure
1) Remove the Rear Cover Rib Unit [1].
• 2 bearing holders [2]
• 1 fixing guide [3]
• 1 connector [4]
[1]
4 Disassembly/Assembly > External Cover, Internal Cover > Removing the Rear Cover Rib Unit > Procedure
[3]
[4]
[2]
CAUTION:
At installation, make sure that the spring [1] is installed on [A] part before installing the
Rear Cover Rib Unit.
F-4-40
4-27
[1]
[A]
F-4-41
4-27