Canon MF8580Cdw Service Manual page 291

4
Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
11) Hold the 2 parts [A] of the ITB Unit to pull out the ITB Unit [1]. Then, place the ITB Drive
Link [2] at the center of the rail [B].
[2]
[B]
4 Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
[A]
[1]
[2]
[B]
F-4-505
12) Put the connector [1] through the hole [A] of the guide, and secure the harness [2] to the
plate [3] of the ITB Unit using tapes [4].
CAUTION:
When installing/removing the ITB Unit, be sure to secure the harness [2] using tapes to
prevent it from being caught inside the host machine.
[3]
[2]
[4]
[A]
[1]
4-221
[A] [1]
F-4-506
4-221