Canon MF8580Cdw Service Manual page 315

4
Disassembly/Assembly > Pickup Feeder System > Removing the Pickup Unit > Procedure
9) Place the host machine with the Right Cover [1] down.
CAUTION:
When laying down the main body, be sure to secure the ADF Unit with tape to prevent
from opening.
In case that the ADF Unit is not secured with tape, when returning the main body to its
original position, the ADF Unit is closed swiftly, so this might cause damage on the main
body or injuries by catching the fingers.
[1]
10) Move the 2 Multi-purpose Tray Paper Width Guide Plates [1] to the inside as shown in the
figure below.
[1]
4 Disassembly/Assembly > Pickup Feeder System > Removing the Pickup Unit > Procedure
F-4-558
F-4-559
11) Remove the 2 springs [1] using a pair of needlenose pliers.
• 4 Hooks [2]
4-245
[1]
[2]
[1]
[2]
F-4-560
4-245