Canon MF8580Cdw Service Manual page 316

4
Disassembly/Assembly > Pickup Feeder System > Removing the Pickup Unit > Procedure
12) Remove the Pickup Unit [1].
• 2 Screws [2]
• 2 Bosses [3]
x2
[3]
[1]
[2]
[3]
CAUTION:
When installing the Pickup Unit, go through the following steps.
1) Align the 2 bosses [1] of the Pickup Unit with the 2 edges [A] of the cut-off of the host
machine, and install the Pickup Unit [2] on the host machine.
[A]
4 Disassembly/Assembly > Pickup Feeder System > Removing the Pickup Unit > Procedure
[3]
[1]
[3]
F-4-561
[1]
[2]
[1]
F-4-562
2) Push the lower side of the Pickup Unit [1], and fit the protrusion [2] of the host
machine into the hole [A] of the plate.
[2]
[A]
3) Push the upper side of the Pickup Unit [1] to fit the protrusion [2] of the host machine
into the hole [B] of the plate, and secure with the 2 screws [3] removed previously.
x2
[3]
[1]
4-246
[1]
F-4-563
[B]
[2]
F-4-564
4-246