Overview
Service Mode Menu
Service mode
Service mode for copier
COPIER
ADF service mode
FEEDER
FAX
FAX service mode
Service mode for test print, operation check, etc.
TESTMODE
8
Service Mode > Overview > Backing up Service Mode
Service mode for copier
DISPLAY
I/O
I/O display mode
Adjustment mode
ADJUST
Operation / inspection mode
FUNCTION
Specification setting mode
OPTION
COUNT ER
Counter mode
Adjustment mode
ADJUST
Operation / inspection mode
FUNCTION
Bit switch registration mode
SSSW
MENU
Menu switch registration mode
NUM
Numeric parameter setting mode
NCU
NCU parameter setting mode
(Service adjustment is not available)
PRINT
Print test mode
FAX test mode
FAX
F-8-1
8
Service Mode > Overview > Backing up Service Mode
Backing up Service Mode
Each device is tuned at the time of shipment and the tuned values are written on the service
label.
However, when replacing the main controller PCBs / DC controller PCBs or clearing RAM,
tuned ADJUST and OPTION values are reset to defaults. Each service technician should
adjust these values in field and ensure to write values after changes in the service label. If the
corresponding item is not found on the service label, enter the value in the blank space.
• Service label position (MF8500 series)
• Service label position (MF8200 series)
8-2
[1]
F-8-2
[1]
F-8-3
8-2