4
Disassembly/Assembly > Controller System > Removing the Speaker (MF8280Cw/8250Cn) > Procedure
4) Remove the fan [1].
• 2 Claws [2]
x2
[2]
CAUTION:
When installing the fan [1], be sure to set its orientation as shown in the figure below.
• Face the label [2] inside.
• Face the harness [3] upward.
4
Disassembly/Assembly > Controller System > Removing the Speaker (MF8280Cw/8250Cn) > Procedure
[1]
F-4-482
[3]
[2]
[1]
F-4-483
Removing the Speaker (MF8280Cw/8250Cn)
■ Preparation
1) Remove the Right Cover. Refer to page 4-147.
2) Remove the Controller Cover. Refer to page 4-182.
■ Procedure
1) Remove the Speaker [1].
• 1 Connector [2]
• Guide [A]
• 2 Claws [3]
[3]
x2
4-212
[2]
[A]
[1]
F-4-484
4-212