Couter - Canon MF8580Cdw Service Manual

■ SERIAL
COPIER > OPTION > SERIAL
SN-MAIN Entry of serial number
Details To write the serial number of this machine in the Main
Controller PCB.
When this item is executed, the 8-digit alphanumeric
entered in System Settings > Device Information >
Location in user mode is written in the Main Controller
PCB.
When replacing the Main Controller PCB, be sure to write
the serial number in the new PBC to prepare for trouble
since the serial number of the device is not succeeded.
Use case - When replacing the Main Controller PCB
Adj/set/operate method 1) Write down the current data in System Settings >
Device Information > Location in user mode.
2) Replace the Main Controller PCB after turning OFF the
main power switch.
3) Enter the serial number (8-digit alphanumeric) in
"Location" of step 1.
4) Select SN-MAIN, and then press OK key to write in the
Main Controller PCB.
After writing, the serial number entered in step 3 is
deleted.
5) Turn OFF/ON the main power switch.
6) Output the spec report from COPIER> FUNCTION>
MISC-P> SPEC to check the serial number (Body No.).
7) Enter the data backed up in step 1 in "Location".
Caution Since the above "Location" is only temporarily used to
store data, back up the data before input and enter it
again after writing is completed.
Related service mode COPIER> FUNCTION> MISC-P> DHALF
Related user mode System Settings > Device Information> Location
8
Service Mode > COPIER > COUTER > TOTAL
M82 M85
○ ○
T-8-21
8 Service Mode > COPIER > COUTER > TOTAL

COUTER

■ TOTAL
COPIER > COUNTER > TOTAL
SERVICE1 Service-purposed total counter 1
Details To count up when the paper is delivered outside the
machine.
The counter is advanced regardless of the original size.
The counter is not advanced by delivery in service mode.
Display/adj/set range 0 to 99999999
Unit Number of sheets
Default value 0
SERVICE2 Service-purposed total counter 2
Details To count up when the paper is delivered outside the
machine.
The counter is advanced regardless of the original size.
The counter is not advanced by delivery in service mode.
Display/adj/set range 0 to 99999999
Unit Number of sheets
Default value 0
TTL Total counter
Details To display the total of counters of copy, PDL print, FAX,
report print and media print.
(Total of COPY, PDL-PRT, FAX-PRT, RPT-PRT and MD-
PRT in service mode described below)
Display/adj/set range 0 to 99999999
Unit Number of sheets
Default value 0
Related service mode COPIER> COUNTER> TOTAL> COPY, PDL-PRT, FAX-
PRT, RPT-PRT, MD-PRT
COPY Total copy counter
Details To count up when the copy is delivered outside the
machine.
The counter is advanced regardless of the original size.
The counter is not advanced by delivery in service mode.
Display/adj/set range 0 to 99999999
Unit Number of sheets
Default value 0
Related service mode COPIER> COUNTER> TOTAL> TTL
8-30
M82 M85
○ ○
○ ○
○ ○
○ ○
8-30