Canon MF8580Cdw Service Manual page 173

4
Disassembly/Assembly > Image Formation System > Removing the Drum Motor > Removing the Secondary Transfer Outer Roller
2) Remove the wire harness guide [1].
• 1 claw [2]
• 2 hooks [3]
[3]
3) Remove the Drum Motor [1].
• 3 screws [2]
x3
4 Disassembly/Assembly > Image Formation System > Removing the Drum Motor > Removing the Secondary Transfer Outer Roller
[2] [1]
[3]
F-4-221
[1]
[2]
F-4-222
CAUTION:
Be sure to identify the Drum Motor and the Developing Motor by the difference in gears.
• Gear [1] of the Drum Motor: White, with a groove [A] on its side
• Gear [2] of the Developing Motor: Black, with no groove
[1]
[A]
■ Removing the Secondary Transfer Outer Roller
CAUTION:
Secondary Transfer Outer Roller is included in Secondary Transfer FeedUnit so when
replacing the Secondary Transfer Outer Roller, be sure toreplace the Secondary
Transfer Feed Unit itself. Refer to page 4-127.
4-103
[2]
F-4-223
4-103