Removing The Duplex Reverse Drive Unit - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Controller System > Removing the Duplex Reverse Drive Unit > Procedure

Removing the Duplex Reverse Drive Unit

■ Preparation
1) Removing the Right Cover. Refer to page 4-20.
2) Removing the Left Cover. Refer to page 4-17.
3) Removing the Rear Upper Cover. Refer to page 4-24.
4) Removing the Rear Cover. Refer to page 4-24.
5) Removing the Rear Lower Cover. Refer to page 4-25.
6) Removing the Rear Cover Rib Unit. Refer to page 4-27.
■ Procedure
1) Remove the wire harness [1] from the wire harness cover [2].
• 2 connectors [3]
[2]
[1]
4 Disassembly/Assembly > Controller System > Removing the Duplex Reverse Drive Unit > Procedure
[3]
x2
[1]
F-4-177
CAUTION:
Be sure to insert the 2 harnesses [1] at the bottom of the Guide [A] when installing.
[A]
[1]
2) Open [1] the Duplex Feed Unit, and remove the Duplex Reverse Drive Unit [2].
• 3 screws [3]
x3
[2]
4-85
[A]
[1]
F-4-178
[3]
[1]
F-4-179
4-85