Removing The Control Panel Unit - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Controller System > Removing the Control Panel Unit > Procedure

Removing the Control Panel Unit

■ Procedure
CAUTION:
When removing the Control Panel Unit, the Screw Face Seal [2] on the back side of the
Reader Unit [1] needs to be removed. Be sure to prepare a new Screw Face Seal to
reaffix it later.When reaffixing, be sure to use a new Screw Face Seal. Do not reuse the
removed Screw Cover Seal.
[1]
4 Disassembly/Assembly > Controller System > Removing the Control Panel Unit > Procedure
[2]
F-4-139
1) Remove the claw [1] to remove the Reader Shaft Retainer [2].
2) While supporting the ADF Unit/Copyboard + Reader Unit [3], remove the Reader Support
Shaft [4].
3) Bring down the Reader Support Shaft [4] to close the ADF Unit/Copyboard + Reader Unit [3].
[1]
[2]
4) ADF+Open the ADF+Reader Unit [1], and remove the 3 Screw Face Seals [2] at the bottom
of the Reader Unit.
CAUTION:
Do not reuse the removed Screw Cover Seal [2].
[1]
4-70
[3]
[4]
F-4-140
[2]
F-4-141
4-70