Canon MF8580Cdw Service Manual page 377

COPIER > OPTION > BODY
NS-LGN Setting of LOGIN authentication at SMTP authentication
Details To restrict use of LOGIN authentication at the time of
SMTP authentication.
When 1 is set, LOGIN authentication is not used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Used (SMTP server-dependent), 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user
authentication function is added to SMTP, which is the
protocol to be used for e-mail transmission. At the time of
e-mail transmission, this protocol executes authentication
of the user account and the password between the SMTP
server and the user to approve e-mail transmission only
when it's authenticated.
SLPMODE Setting of shift to sleep mode
Details To restrict shift to sleep mode 1/sleep mode 3.
When 1 is set, the machine does not shift to sleep mode.
Use case When sleep failure occurs
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Shift is available., 1: Shift is not available.
Default value 0
SDTM-DSP Setting of automatic shutdown menu display
Details When setting COPIER> OPTION> BODY> SDTM-DSP to
1, menu is displayed. When 0 is set, menu is hidden.
Use case When setting the automatic shutdown menu display
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Menu is hidden., 1: Menu is displayed.
Default value 0
Supplement/memo Even with the fax model for locations other than Europe,
the service mode is displayed. However, the menu will not
be displayed on UI even 1 is set.
RMT-SW ON/OFF setting of RUI service mode function
Details To set ON/OFF of RUI service mode function.
Use case When setting ON/OFF of RUI service mode function
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
8
Service Mode > COPIER > OPTION > ACC
M82 M85
○ ○
○ ○
○ ○
○ ○
8 Service Mode > COPIER > OPTION > ACC
COPIER > OPTION > BODY
PSWD-SW Setting of service mode password level
Details To set the password level required to get into service
mode.
Use case When getting into service mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Password is not required
(RUI service mode password only)
1: Password for service engineer is required
2: Passwords for service engineer and system
administrator at user's site are required
Default value 0
SM-PSWD Password setting for service technician
Details To set the password required to enter when the level
is set to 1 or 2 in PSWD-SW at the time of getting into
service mode.
Use case When the level is set to 1 or 2 in PSWD-SW at the time of
getting into service mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 99999999
Default value 11111111
■ ACC
COPIER > OPTION > ACC
WLANMODE Setting of IEEE802.11n
Details To set whether to enable IEEE802.11n which is the
wireless LAN standard.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 1 (Not depend on the location)
8-29
M82 M85
○ ○
○ ○
T-8-19
M82 M85
○ ○
T-8-20
8-29