Backup Data - Canon MF8580Cdw Service Manual

Backup Data

Data Location Replace
DC Controller Main
PCB Controller
PCB
Address Book Flash ROM - Clear
Menu
Preferences Flash ROM - Clear
Timer Settings Flash ROM - Clear
Common Settings Flash ROM - Clear
Copy Settings Flash ROM - Clear
Fax Settings Flash ROM - Clear
Scan Settings Flash ROM - Clear
USB Direct Print Flash ROM - Clear
Settings
Printer Settings Flash ROM - Clear
Key and Certificate Flash ROM - Clear
System Management Flash ROM - Clear
Settings
Serial Number Flash ROM - Clear
*11
Job History Flash ROM - Clear
Service Service mode RCON - -
mode setting values
(R-CON)
Service mode Flash ROM - Clear
setting values
(MN-CON)
Service mode Flash ROM Clear -
setting values
(DC-CON)
*1. Log data such as Mac address, USB serial number, printer-related setting values, scanner-related setting values, user data, and logs are initialized.
*2. The factory adjustment values of the Reader and ADF are initialized.
*3. Service data is cleared. User data is not cleared. The factory adjustment values of the Reader and ADF are not initialized.
*4. The logs (communication management, print, jam, error, and alarm) are cleared.
*5. The user data, service data, logs, and system administrator are initialized. (The system manager ID and password are changed back to the default values.) The factory adjustment values of the Reader and ADF are not initialized.
*6. Excluding Fax Setup Guide
*7. Excluding the shortcut key
*8. FUNCTION > SYSTEM > IMPORT / FUNCTION > SYSTEM > EXPORT
*9. FUNCTION > VIFFNC > STOR-DCN / FUNCTION > VIFFNC > RSTR-DCN
*10. When the key and certificate are initialized, TLS authentication of IEEE802.1X and the SSL setting are changed to "OFF".
*11. Only devices without counter meter are supported. After replacement of the PCB, resetting is required. OPTION > SERIAL > SN-MAIN
*12. The system administrator ID and the password are changed back to the default values. <Counter meter-installed model> ID: 7654321 / PWD: 7654321
*13. Excluding [Forwarding Settings], [Remote UI On/Off], [Update Firmware], [Initialize Key and Certificate], [Initialize Address Book], and [Initialize System Management Settings]
User function > Initialize Menu
Initialize Menu
Preferences Timer Common Copy Fax
Settings Settings Settings Settings
*1
- - - - -
Clear - - - -
- Clear - - -
- - Clear - -
- - - Clear -
- - - - Clear
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
Delete
Other
Scan USB Printer Initialize Initializing the Initializing
Settings Direct Settings All Address Book the Key and
Print Certificate
Settings
- - - - Clear -
- - - Clear - -
- - - Clear - -
- - - Clear - -
- - - Clear - -
- - - Clear - -
Clear - - Clear - -
- Clear - Clear - -
- - Clear Clear - -
- - - - - Clear
*10
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
<Model without counter meter> ID: 0 / PWD: 0
Backup by User
Service function
Initializing R-CON SRVC- HIST ALL Yes/No Method
the System *2 DAT *4 *5
Management *3
Settings
- - - - Clear Yes Remote UI PC
- - - - Clear Yes Remote UI PC
- - - - Clear Yes Remote UI PC
- - - - Clear Yes Remote UI PC
- - - - Clear Yes Remote UI PC
- - - - Clear Yes Remote UI PC
*6
- - - - Clear Yes Remote UI PC
*7
- - - - Clear Yes Remote UI PC
- - - - Clear Yes Remote UI PC
- Clear No -
Clear - - - Clear Yes Remote UI PC
*12 *13
- - - - - No -
- - - Clear Clear No -
- Clear - - - No -
- - Clear - Clear No -
- - - - - No -
VIII
Backup by Service
Location Yes/No Method Location
to be to be
stored stored
No - -
No - -
No - -
No - -
No - -
No - -
No - -
No - -
No - -
- No - -
No - -
- No - -
- No - -
- No - -
- Yes Service USB
mode memory
*8
- Yes Service Flash
mode ROM
*9
T-9-3
VIII