Canon MF8580Cdw Service Manual page 376

COPIER > OPTION > BODY
LOCALE Setting of location
Details To set the location.
At installation in areas other than Japan, perform the
following procedure to match the setting information with
that of the location.
Use case • At installation
• When changing the location information
Adj/set/operate method 1) Enter the setting value under LOCALE, and then press
OK key.
2) Set the paper size configuration under SIZE-LC.
3) Execute COPIER> FUNCTION> CLEAR> ALL.
4) Turn OFF/ON the main power switch.
Caution Since COPIER> FUNCTION> CLEAR> ALL is executed
when changing the location, the setting information of
user mode, service mode, etc. is initialized.
The setting information of this item is not initialized.
Display/adj/set range 1 to 8
1: Japan, 2: North America, 3: Korea, 4: China, 5: Taiwan,
6: Europe, 7: Asia, 8: Oceania
Default value 1
Related service mode COPIER> FUNCTION> CLEAR> ALL
COPIER> OPTION> BODY> SIZE-LC
SIZE-LC Setting of paper size configuration
Details To set the paper size configuration.
At installation in areas other than Japan, perform the
following procedure to match the setting information with
that of the location.
Use case • At installation
• Upon user's request
Adj/set/operate method 1) Set the location under LOCALE.
2) Enter the setting value under SIZE-LC, and then press
OK key.
3) Execute COPIER> FUNCTION> CLEAR> ALL.
4) Turn OFF/ON the main power switch.
Caution Since COPIER> FUNCTION> CLEAR> ALL is executed
when changing the location, the setting information of
user mode, service mode, etc. is initialized.
The setting information of this item is not initialized.
Display/adj/set range 1 to 4
1: AB configuration, 2: Inch configuration, 3: A
configuration, 4: AB/Inch configuration
Related service mode COPIER> FUNCTION> CLEAR> ALL
COPIER> OPTION> BODY> LOCALE
8
Service Mode > COPIER > OPTION > BODY
M82 M85
○ ○
○ ○
8 Service Mode > COPIER > OPTION > BODY
COPIER > OPTION > BODY
NS-CMD5 Setting of CRAM-MD5 authentication method at SMTP
authentication
Details To restrict use of CRAM-MD5 authentication method at
the time of SMTP authentication.
When 1 is set, CRAM-MD5 authentication method is not
used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Used (SMTP server-dependent), 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user
authentication function is added to SMTP, which is the
protocol to be used for e-mail transmission. At the time of
e-mail transmission, this protocol executes authentication
of the user account and the password between the SMTP
server and the user to approve e-mail transmission only
when it's authenticated.
NS-PLN Setting of plaintext authentication at SMTP authentication
Details To restrict use of PLAIN/LOGIN authentication,
which is plaintext authentication, at the time of SMTP
authentication under the environment where the
communication packet is not encrypted.
When 1 is set, plaintext authentication is not used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Used (SMTP server-dependent), 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user
authentication function is added to SMTP, which is the
protocol to be used for e-mail transmission. At the time of
e-mail transmission, this protocol executes authentication
of the user account and the password between the SMTP
server and the user to approve e-mail transmission only
when it's authenticated.
8-28
M82 M85
○ ○
○ ○
8-28