Main Assembly E: Plate, Pressure Spring - Epson EU-T432 Technical Manual

Confidential

Main Assembly E: Plate, pressure spring

Reassembly
Part name
step
1 Plate, pressure spring
2 Circuit board assembly
C.B.S-tite (M2.5 × × × × 4)
3 Spring, press head
4
Rev. A
Install the circuit board to the plate, pressure spring, and secure it with
× 1
screws.
C.B.S-tite (M2.5 × 4)
circuit board
assembly
<Check>
Tightening torque: 608 to 657 mN•m {6.2 to 6.7 kg•cm}
× 2
Install the spring, press head to the plate, pressure spring.
<Check>
Make sure that the spring, press head is pushed securely into the plate,
pressure spring.
Hook the edge of the spring, press head to the groove of the thermal print
head assembly while pushing the plate, pressure spring in the arrow
direction; then hook it to the groove of the frame assembly.
groove of the
frame assembly
EU-T432 Technical Manual
Assembly procedure
plate, pressure spring
plate, pressure spring
groove of the thermal
print head assembly
Assembly and Disassembly 6-21
spring, press head
groove of the frame
assembly
spring, press head