Confidential
Chapter 3
Handling
Precautions
Transport Precautions
When shipping the printer, use antistatic packing materials.
Remove the paper roll when transporting the EU-T432.
Make sure to close the paper roll supply module, the platen unit of the printer module, and
the cut sheet presenter module when transporting.
Carrying Precautions
Hold the paper roll supply module and the handle (a part with a green sticker on it) on the
paper roll supply module when carrying the printer as shown below. When this product is
equipped with an optional loop guide, you can hold the loop guide to carry it.
Note:
Do not hold parts other than those mentioned above; otherwise you can cause damage or deformation
of parts that will affect the operation of the printer.
When you put this unit on a place such as a desk, be sure to put it on a flat place; otherwise,
a malfunction may occur because of deformation of parts.
printer module
cut sheet presenter module
hole for a ground wire
Rev. A
handle
Figure 3-1 Correct way of holding the EU-T432
EU-T432 Technical Manual
paper roll supply module
Handling 3-1