Epson EU-T432 Technical Manual page 97

Confidential
Reassembly
Part name
step
11 Roll paper holder L
assembly (for a 6 inch
paper roll diameter)
or
Roll paper holder L assembly,
B (for a 8 inch paper roll
diameter)
Spring, roll paper holder × 2
★
12 Roll paper holder L
assembly
assembly, B)
C.B (M3 × × × × 8)
★
note:
In this illustration, the roll paper
holder R assembly is attached to
the frame, roll paper holder.
spring, roll paper holder
Rev. A
Attach the spring, roll paper holder to the roll paper holder L assembly (or
roll paper holder L assembly, B).
× 1
× 1
< Check >
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
Align three dowels C on the roll paper holder, L assembly with the square
holes and the notch C on the frame and the cover, NE detector from the
(Roll paper holder L
× 1
inside of the frame, roll paper holder; then secure the assembly with C.B
× 2 (M3 × × × × 8) screws from the outside. (The dowels, holes and notch D for the
roll paper holder, L assembly, B)
< Check >
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
dowels C
dowels D
EU-T432 Technical Manual
Assembly procedure
C.B (M3 × 8)
square hole C (mounting position for
8 inch type)
C.B (M3 × 8)
(mounting position for
6 inch type)
dowel D
square hole and notch
C and D (common)
roll paper holder, L
assembly (for 6 inch type)
roll paper holder, L assembly, B
(for 8 inch type)
Assembly and Disassembly 6-37