Pre-Assembly B: Roll Paper Holder Unit - Epson EU-T432 Technical Manual

Confidential

Pre-assembly B: Roll paper holder unit

Reassembly
Part name
step
1 Roll paper holder
reinforcement assembly × 1
Spring, open lever
★
plate, reinforcement
C.B.S-tite (M3 × × × × 5)
2
★
3 Gear, frame opening and
shutting
P. washer
H. nut (3)
C.F (3 × × × × 8)
★
4 Gear, frame opening and
shutting
P. washer
H. nut (3)
C.F (3 × × × × 8)
★
roll paper holder
reinforcement assembly
gear, frame opening
and shutting
C.F (3 × 8)
6-34 Assembly and Disassembly
Attach the spring, open lever to the convex parts on the frame, open
lever on the roll paper holder reinforcement assembly.
× 1
< Check >
Make sure to confirm that the lever, open operates properly.
frame, open lever
× 1
Attach the roll paper holder reinforcement assembly to the frame, roll
paper holder assembly, and secure it with a C.B.S-tite (M3 × × × × 5) screw.
< Check >
Tightening torque: 735 to 931 mN•m {7.5 to 9.5 kg•cm}
Align the gear, frame opening and shutting with the dowels on the frame,
× 1 roll paper holder from inside, and attach a C.F (3 × × × × 8) screw to it from the
× 1
(3 × × × × 0.5 × × × × 7)
outside. Secure the gear, frame opening and shutting with an H. nut (3)
× 1 via a P. washer (3.2 × × × × 0.5 × × × × 7).
× 1
< Check >
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
Perform steps 2 and 3 for the other side of the frame, roll paper holder
× 1
assembly.
× 1
(3 × × × × 0.5 × × × × 7)
× 1
× 1
< Check >
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
P. washer (3 × 0.5 × 7)
Assembly procedure
spring, open lever
C.B.S-tite (M3 × 5)
frame, roll paper
holder assembly
H. nut (3)
Rev. A