Epson EU-T432 Technical Manual page 3

Confidential
®
EPSON is a registered trademark of Seiko Epson Corporation.
General Notice: Other product and company names used herein are for identification purposes only and may be
trademarks of their respective companies.
To assure the safe operation of this product, carefully observe the specifications as well as the notes provided below.
Seiko Epson Corporation will not bear any responsibility for any damage or injuries arising from use of this product
that is not in accordance with the specifications and the notes provided below.
The conditions setting forth the maximum time power can be applied (and the maximum voltage that can be
applied) to electronic components such as the head, motor, and magnets must be observed.
If the maximum time power can be applied (or the maximum voltage that can be applied) is exceeded, the components
mentioned above could overheat and start a fire or begin to smoke.
Always include protective circuitry governing the length of time power is applied and the amount of current that
is applied when designing the drive and control circuits for the head, motor, magnets, etc.
If protective circuitry is not included, misoperation of the printer control circuits could cause the components mentioned
above to overheat and begin to smoke or burn.
The case must be designed so that movable parts, such as gears, are not exposed.
Touching moving parts could cause a laceration or other injury.
ii
Trademarks
Points That Must Be Observed
To Assure Product Safety
Notes on Head Control
Notes on Handling
Rev. A