Main Assembly A: Printer Module - Epson EU-T432 Technical Manual

Confidential

Main Assembly A: Printer module

Reassembly
Part name
step
1 Fixing plate, printer
assembly
Printer module
C.B.S-tite (M3 × × × × 5)
2
★
C.B.S-tite
(M3 × 5)
Plate, roll paper tension × 1
3
Guide, roll paper tension
C.B (M3 × × × × 4)
★
fixing plate, printer assembly
Rev. A
Pass the cable, printer of the printer module through the square hole on
× 1
the fixing plate, printer assembly.
× 1
Fold the cable head as shown in the illustration below.
× 4
Align the holes on the printer module and the fixing plate, printer
assembly, and secure them with screws.
< Check >
Tightening torque: 735 to 931 mN•m {7.5 to 9.5 kg•cm}
about 45°
Attach the plate, roll paper tension to the guide, roll paper tension so that
× 2
the plate will be inside of the guide, aligning the holes on the plate with
× 2
those on the guide; then secure it to the fixing plate, printer assembly
with C.B (M3 × × × × 4) screws.
< Check >
Secure the guide, roll paper tension so that it is placed in the center of
the paper guide of the printer module.
If you remove the printer module only, attach the guide, roll paper
tension again.
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
guide, roll paper tension
EU-T432 Technical Manual
Assembly procedure
printer module
cable head
Assembly and Disassembly 6-49
cable,
printer
fixing plate, printer
assembly
plate, roll paper tension
C.B (M3 × 4)