Pre-Assembly E: Cutter Unit, B - Epson EU-T432 Technical Manual

Confidential

Pre-assembly E: Cutter unit, B

Reassembly
Part name
step
1 Cutter cover sub-unit
2 Cutter frame assembly
C.B.S-tite (M3 × × × × 5)
Rev. A
Pass the lead wire, paper cutter through the hole on the cutter frame
× 1
assembly and secure the cutter cover sub-unit and the cutter frame
assembly with a screw.
When putting the cutter cover sub-unit and the cutter frame assembly
together, insert the shaft, movable cutter blade drive into the oval hole
on the movable cutter blade.
cutter cover, sub-unit
shaft, movable cutter
blade drive
oval hole
cutter frame assembly
<Check>
Tightening torque: 834 to 932 mN•m {8.5 to 9.5 kg•cm}
Make sure that the shaft, movable cutter blade drive fits securely into the
oval hole on the movable cutter blade.
Make sure that the edges of the cutter cover sub-unit fit into the hooks on
the cutter frame assembly.
cutter cover, sub-unit
cutter frame assembly
Assembly procedure
hook
cutter cover, sub-unit
Assembly and Disassembly 6-11
EU-T432 Technical Manual
lead wire, paper
cutter
C.B.S-tite (M3 × 5)
shaft, movable cutter
blade drive
oval hole
hook