Omron CS1W-AD041-V1 Operation Manual page 301

Adjusting Offset and Gain
278
Change the set value, using the Up Bit (bit 03 of word n+1) and the Down
Bit (bit 02 of word n+1).
Bit 15 14 13 12
Word n+1
While the Up Bit is ON, the set value will be
increased by 1 resolution every 0.5 seconds.
After it has been ON for 3 seconds, the set
value will be increased by 1 resolution every
0.1 seconds.
While the Down Bit is ON, the set value will be
decreased by 1 resolution every 0.5 seconds.
After it has been ON for 3 seconds, the set
value will be decreased by 1 resolution every
0.1 seconds.
• The following example increases the output voltage.
C A
CONT
SHIFT
2 0
#
The bit will remain ON until the output voltage becomes an appropriate val-
ue, at which time, the output will turn OFF.
SET
RESET
• The following example decreases the output voltage.
C A
CONT
SHIFT
2 0
#
The bit will remain ON until the output voltage becomes an appropriate val-
ue, at which time, the output will turn OFF.
SET
RESET
11 10 09 08 07 06
A B A D
0 1
0 3
200103
200103
200103
A B A C
1 0 2
0
200102
200102
200102
Section 6-9
05 04 03 02 01 00
Up Bit Down Bit
MON
^ OFF
^ ON
^ OFF
MON
^ OFF
^ ON
^ OFF