Omron CS1W-AD041-V1 Operation Manual page 10

About this Manual:
This manual describes the installation and operation of the CS1W-AD041-V1, CS1W-AD081-V1,
CS1W-AD161, CJ1W-AD041-V1, and CJ1W-AD081-V1 Analog Input Units; the CS1W-DA041, CS1W-
DA08V, CS1W-DA08C, CJ1W-DA021, CJ1W-DA041, CJ1W-DA08V, and CJ1W-DA08C Analog Output
Units; and the CS1W-MAD44 and CJ1W-MAD42 Analog I/O Units. This manual includes the sections
described below.
The input function of CS/CJ-series Analog I/O Units converts analog sensor output to the digital format
and transmits it to CS/CJ-series PLCs. The output function converts digital data from the PLC to the
analog format for output.
Please read this manual and the other manuals related to the CS/CJ-series Analog I/O Units carefully
and be sure you understand the information provided before attempting to install and operate the
Units. The manuals used with the CS/CJ-series Analog I/O Units are listed in the following table. The
suffixes have been omitted from the catalog numbers. Be sure you are using the most recent version
for your area.
SYSMAC CS-series
CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H
Programmable Controllers Operation Manual
SYSMAC CS Series
CS1D-CPU@@H CPU Units, CS1D-CPU@@S CPU Units,
CS1D-DPL01 Duplex Unit, CS1D-PA/PD@@@ Power
Supply Unit
CS1D Duplex System Operation Manual
SYSMAC CJ-series
CJ1G-CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@
Programmable Controllers Operation Manual
SYSMAC CS/CJ-series
CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H, CJ1G-
CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@
Programmable Controllers Programming Manual
SYSMAC CS/CJ-series
CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H, CJ1G-
CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@
Programmable Controllers Instructions Reference Manual
SYSMAC WS02-CXPC1-EV50
CX-Programmer Ver. 5.0 Operation Manual
SYSMAC CS/CJ-series
CQM1H-PRO01-E, CQM1-PRO01-E, C200H-PRO27-E
Programming Consoles Operation Manual
Name Cat. No.
W339 Describes the installation and operation
of the CS-series PLCs.
W405 Provides an outline of and describes the
design, installation, maintenance, and
other basic operations for a Duplex Sys-
tem based on CS1D CPU Units.
W393 Describes the installation and operation
of the CJ-series PLCs.
W394 Describes the programming methods
required to use the functions of the CS/
CJ-series PLCs.
W340 Describes the ladder diagram program-
ming instructions supported by CS/CJ-
series PLCs.
W437 Provides information on how to use the
CX-Programmer, a programming device
that supports the CS/CJ-series PLCs.
W341 Provides information on how to program
and operate CS/CJ-series PLCs using a
Programming Console.
Contents
xi