11-4
C
11: A
HAPTER
DMINISTERING
Enter IPX Address: 0x45469f30
Enter Cost [1]: 1
Enter Frame Format (Ethernet II: 0, 802.2: 1, Raw 802.3: 2, SNAP: 3): 1
IPX VLANs:
Index
3
4
Select VLAN index: 3
Modifying an
Interface
Top-Level Menu
system
ethernet
interface
fddi
route
display
atm
define
server
bridge
forwarding
modify
ip
rip
remove
enhanced
ipx
sap
appletalk
statistics
snmp
analyzer
script
logout
Removing an
Interface
Top-Level Menu
system
ethernet
interface
fddi
route
display
atm
server
define
bridge
forwarding
modify
ip
rip
remove
ipx
enhanced
sap
appletalk
statistics
snmp
analyzer
script
logout
IPX R
OUTING
Example:
Ports
1-8
9-12
You might want to change the configuration of an interface that you
have already defined.
To modify an IPX interface:
1 From the Administration Console top-level menu, enter:
ipx interface modify
You are prompted for the interface parameters. Press [Return] at the
prompts for which you do not want to modify the value.
2 Modify the existing interface parameters by entering a new value at the
prompt.
You may want to remove an interface if you no longer perform routing
on the ports associated with the interface.
To remove an IPX interface definition:
1 From the Administration Console top-level menu, enter:
ipx interface remove
2 Enter the index number(s) of the interface(s) you want to remove.
The interface is removed.