ROCKER COVER, ROCKER BRACKET AND CAMSHAFT
Camshaft
Service standards (Unit: mm)
Location
1, 3
Interference between camshaft gear and camshaft
3
Camshaft
Removal procedure
11-22
Maintenance item
Intake
Cam lift
Exhaust
Bend
Oil clearance at journal
• Remove the camshaft gear by pushing on the end of the cam-
CAUTION
• Do not attempt to remove the camshaft gear with a hammer
Follow the disassembly sequence in re-
verse.
Standard value
0.017 to 0.062
5.023
7.084
0.02 or less
0.075 to 0.12
Removal: Camshaft gear
shaft with a press or other similar tool.
as damage will result. Use a press or other similar tool.
Disassembly sequence
1 Camshaft gear
2 Key
3 Camshaft
: Non-reusable parts
Assembly sequence
Limit
–
4.973
7.034
0.04
0.25
Remedy
Replace
Lobe diame-
ter:
45.110
Base circle
diameter:
40.087
Lobe diame-
ter:
47.370
Base circle
diameter:
40.286
Replace
Inspect