Fuel Filter - Mitsubishi 6M60-TL Service Manual

FUEL FILTER

Tightening torque (Unit: N·m {kgf·m})
Mark
Water separator sensor
Case
Plug
Lubricant and/or sealant
Mark
O-ring
Special tools
Mark
Filter wrench
Removal procedure
13A-14
Parts to be tightened
Points of application
Tool name and shape
• Drain fuel from the case by loosening the water separator sen-
• Using
CAUTION
• Be careful not to damage the case.
WARNING
• Fuel is highly flammable. Keep it
• Thoroughly wipe up any spilled fu-
Follow the disassembly sequence in re-
verse.
Tightening torque
5 ± 1 {0.5 ± 0.1}
30 ± 2 {3.1 ± 0.2}
Specified lubricant and/or sealant
Part No.
MH063203
Removal: Case
sor.
, remove the case.
Disassembly sequence
1 Fuel hose
2 Water separator sensor
3 O-ring
4 Case
5 O-ring
6 Element
7 Plug
8 Fuel filter head
: Non-reusable parts
away from flames and sources of
heat.
el. Otherwise, it may catch fire.
Assembly sequence
10 ± 2 {1 ± 0.2}
Engine oil
Application
Removal and installation of case
Remarks
–
–
–
Quantity
As required