Replacement Of Pcv Valve Element - Mitsubishi 6M60-TL Service Manual

GENERAL INSPECTION AND ADJUSTMENT

1. Replacement of PCV Valve Element

Lubricant and/or sealant
Mark
– O-ring
Points of application
CAUTION
• For information on the element replacement interval, refer
• Be sure to remove and install the cap by hand. Using tools
[Removal]
• Loosen the cap by hand.
CAUTION
• Do not use any tools to loosen the cap. Otherwise, the cap
[Installation]
• Clean the thread on the cap.
• Lightly smear the O-ring with engine oil and fit it on the cap.
• Securely tighten the cap until it stops slightly above the PCV
CAUTION
• Be sure to use a genuine Mitsubishi Fuso element. Using an
• When replacing the element, be sure to replace the O-ring
Specified lubricant and/or sealant
to the element instruction manual. If the element is used be-
yond its replacement interval, it may become clogged, caus-
ing the pressure inside the engine to increase such that oil
leakage occurs.
could result in damage.
may become damaged.
body.
inappropriate element could result in engine trouble.
also.
Engine oil
17
Quantity
As required
17-5