BLOWBY GAS RETURN SYSTEM
<Type B>
Removal sequence
1 Breather hose
2 Breather hose
3 Oil hose
4 PCV valve bracket
5 Oil hose stay
Installation sequence
Perform installation by following the removal sequence in reverse.
Tightening torque (Unit: N·m {kgf·m})
Mark
Clamp
Lubricant and/or sealant
Mark
O-ring
17-10
6 Cap
7 O-ring
8 Element
9 PCV body
Parts to be tightened
Points of application
a: Rocker cover
*
b: Air suction pipe
*
: Non-reusable parts
PCV: Positive crankcase ventilation
Tightening torque
4.9 {0.5}
Specified lubricant and/or sealant
Engine oil
Remarks
–
Quantity
As required