Injector - Mitsubishi 6M60-TL Service Manual

INJECTOR

CAUTION
• To eliminate fuel injection and other problems, protect the injectors and pipes, that have been removed,
from the ingress of contaminants.
• For the maintenance of the injector, ask Denso Service Station.
Assembly sequence
Follow the disassembly sequence in reverse.
CAUTION
• Do not attempt to clean the nozzle hole with a wire brush or other similar tools, or the hole can be dam-
aged.
• Be sure to tighten the nozzle bridge bolts to the specified torque. Overtightening the bolts can deform the
injectors, resulting in incorrect fuel injection.
Tightening torque (Unit: N·m {kgf·m})
Mark
Bolt (for mounting nozzle bridge)
Injection pipe
Eyebolt (for mounting fuel return pipe)
Lubricant and/or sealant
Mark
O-ring
13A-24
Parts to be tightened
Points of application
Disassembly sequence
1 Injection pipe
2 Injection pipe seal
3 O-ring
4 Nozzle bridge
5 Injector
6 O-ring
7 O-ring
8 Nozzle tip gasket
9 Eye bolt
10 Fuel return pipe
a: Two-Way electromagnetic Valve
*
: Non-reusable parts
WARNING
• Fuel is highly flammable. Keep it
away from flames and sources of
heat.
• Be sure to wipe up all spilled fuel.
Unless it is wiped up, it could catch
fire.
Tightening torque
33 to 38 {3.4 to 3.9}
39.2 to 49 {4.0 to 5.0}
25 {2.6}
Specified lubricant and/or sealant
Engine oil
Remarks
–
–
–
Quantity
As required