Assembly: Yoke and brush holder
• To install the yoke and brush holder, follow the removal se-
quence in reverse.
(See "
Disassembly: Yoke and brush holder")
Assembly: Magnetic switch
• Fit the magnetic switch onto the lever with terminal S aligned as
illustrated.
Assembly: Pinion
• For installation of the pinion, it is not necessary to supply current
to the starter.
• Fit the pinion stopper and pinion onto the overrunning clutch,
making sure they are oriented as illustrated.
• Fit the stopper ring into the ring groove of the overrunning
clutch.
• Pull the pinion hard and securely fit the stopper ring into the ring
groove of the pinion stopper.
54
54-25