GENERAL INSPECTION AND ADJUSTMENT
2. Fuel Filter Replacement
Tightening torque (Unit: N·m {kgf·m})
Mark
–
Water separator sensor
–
Case
Lubricant and/or sealant
Location
–
O-ring
Special tools
Mark
Filter wrench
13A-10
Parts to be tightened
Points of application
Tool name and shape
[Removal]
• Drain fuel from the case by loosening the water separator sen-
• Using
WARNING
• Fuel is highly flammable. Keep it away from flames and
• Thoroughly wipe up any spilled fuel. Otherwise, it may
CAUTION
• Be careful not to damage the case.
Tightening torque
5
30
Specified lubricant and/or sealant
Part No.
MH063203
sor.
, remove the case.
sources of heat.
catch fire.
±
±
1 {0.5
0.1}
±
±
2 {3.1
0.2}
Engine oil
Application
Removal and installation of case
Remarks
–
–
Quantity
As required