Registering Favorite Patches In The Favorite List; Selecting Patches From The Favorite List - Roland XV-5080. Owner's Manual

Registering Favorite Patches
in the FAVORITE LIST
You can bring together your favorite and most frequently
used Patches in one place by registering them in the
FAVORITE LIST. The FAVORITE LIST gives you immediate
access to your favorite Patches, whether they are in the XV-
5080 itself, on Wave Expansion Boards, or on memory cards.
You can register up to 64 Patches in this list.
If a Patch on a Wave Expansion Board or memory card is
registered in the list and selected, no sound will be produced
for the Patch unless the required Wave Expansion Board or
memory card is inserted.
1. At the PATCH PLAY page, choose the Patch you want to
register.
2. Press the VALUE dial.
The Sound List window will appear.
* When the SOUND LIST is displayed, press the [F2 (Favorit)]
button.
3. Turn the VALUE dial or press the [INC]/[DEC] button to
select the desired registration destination number.
* No data is registered at the factory settings.
On this page, pressing the VOLUME knob allows you to
audition the Patch being registered.
4. Press the [F3 (Register)] button.
The Patch will be registered to the Favorite List.
To cancel the registration, press the [EXIT] button.
* To cancel the registration, select the file you want to cancel,
and then press the [F4 (Remove)] button.
5. Press the [EXIT] button or the VALUE dial to return to
the PATCH PLAY page.
You can also register the Rhythm Set in the same way.
Chapter 8 Saving Tones and Other Data You've Created
Directly registering to the list on the
PATCH/RHYTHM PLAY page
The following display appears when [SHIFT] is pressed
while on the PATCH/RHYTHM PLAY page.
fig.08-13.e_65
If [F6 (Register)] is pressed at this stage, the data is
registered to the lowest-numbered opening on the list.
Although the message "COMPLETED" instantly appears
in the display when the registration is executed, if the
registration cannot be carried out
Selecting Patches from the
FAVORITE LIST
1. Press the VALUE dial.
The Sound List or Favorite window will appear.
* If the Sound List window will appear, Press the [F2 (F-List)]
button.
2. Turn the VALUE dial or press the [INC]/[DEC] button to
select the desired Patch.
* If you want to cancel the selection, simply press the [UNDO]
button. The value of the parameter will be restored to what it
was when you first positioned the cursor there.
3. Press the [F6 (Select)] button to return to the previous
page.
207