Settings In General Midi Mode; Signal (Part) Flow; Parameters - Roland XV-5080. Owner's Manual

Settings in General MIDI Mode

Signal (PART) Flow

fig.03-004.e
Part

Parameters

The parameters related to Part output settings are shown
below.
GM Effects General page ([GM] - [F6
(Effects)] - [F1 (General)])
Sets the output destination and level for the selected Part, as
well as its send level with respect to the Chorus and Reverb.
Part Output Assign
Sets the output destination for each Part.
Available Settings:
A–D: The Part is sent to the selected pair of OUTPUT A–D
jacks.
Part Dry Send Level
Range: 0–127
Sets the level of the signal to be sent to the OUTPUT jacks,
which is determined by Part Output Assign.
Output Assign
A
B
C
D
Out (GM CHORUS)
CHO
Rev (GM CHORUS)
Chapter 3 Selecting Output Jacks
REV
Out (GM REVERB)
Part Chorus Send Level
Range: 0–127
Sets how much of the Tone is sent to the Chorus. Its final
output destination is determined by the Chorus output
setting.
Part Reverb Send Level
Range: 0–127
Sets how much of the Tone is sent to the Reverb. Its final
output destination is determined by the Reverb output
setting.
Chorus Output Assign
Range: A–D
Selects the OUTPUT jacks to which the Chorus unit's stereo
output is routed.
* As the internal effects processors are in stereo, settings for the
INDIVIDUAL OUTPUT jacks are unavailable.
OUTPUT A
OUTPUT B
OUTPUT C
OUTPUT D
117