Roland XV-5080. Owner's Manual page 87

Roland owner's manual 128-voice 8x expansion/sample playback xv-5080
Hide thumbs Also See for XV-5080.:
Table of Contents

Advertisement

Fast (Low Frequency Fast Rate)
Adjusts the speed of the low-range rotor for the fast-speed
setting.
Accel (Low Frequency Acceleration)
Adjusts the time over which the rotation speed of the low-
range rotor will change from slow-speed to fast-speed (or
fast-speed to slow-speed) rotation. Lower values will require
longer times.
Level (Low Frequency Level)
Adjusts the volume of the low-range rotor.
Tweeter
Slow (High Frequency Slow Rate)
Adjusts the speed of the high-range rotor for the slow-speed
setting.
Fast (High Frequency Fast Rate)
Adjusts the speed of the high-range rotor for the fast-speed
setting.
Accel (High Frequency Acceleration)
Adjusts the time over which the rotation speed of the high-
range rotor will change from slow-speed to fast-speed (or
fast-speed to slow-speed) rotation. Lower values will require
longer times.
Level (RT High Frequency Level)
Adjusts the volume of the high-range rotor.
Output
Level (Output Level)
Adjusts the output level.
Pan (Output Pan) #
Adjusts the stereo location of the output sound.
Chapter 2 Using the XV-5080 Effects
73: KEYBOARD MULTI
Keyboard Multi provides Ring Modulator (RM), Equalizer
(EQ), Pitch Shifter (PS), Phaser (PH) and Delay (Dly) effects
connected in series.
Ring Modulator is an effect that applies amplitude
modulation (AM) to the input signal, producing bell-like
sounds.
fig.02-073m.e
L in
Ring Mod
3-Band EQ
R in
Ring Mod
3-Band EQ
Phaser
Mix
Resonance
Sequence
Ring Mod (Ring Modurator Switch)
Turns the Ring Modulator on/off.
3 Band EQ Sw (3 Band EQ Switch)
Turns the equalizer on/off.
Pch Shift (Pitch Shifter Switch)
Turns the Pitch Shifter on/off.
Phaser (Phaser Switch)
Turns the Phaser on/off.
Delay (Delay Switch)
Turns the delay on/off.
* After turning the VALUE dial to select the effect, you can
press [F1] or [F2] to rearrange the order in which effects are
connected.
Ring Modulator
Freq (RM Frequency) #
Sets the frequency at which modulation will be applied.
Balance (RM Balance) #
Adjusts the balance between the direct and the ring
modulated sound.
Pitch
Shifter
Feedback
L out
Feedback
Delay
R out
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents