Selecting A Patch; Basic Procedure For Selecting A Patch; Selecting Patches By Category (Patch Finder) - Roland XV-5080. Owner's Manual

Selecting a Patch

Basic Procedure for Selecting a
Patch
Turn the VALUE dial or press [INC]/[DEC] to select the
desired Patch.
VALUE Dial
To move quickly through the available Patches:
Turn the VALUE dial while pressing it or, if you prefer, turn
the VALUE dial while pressing [SHIFT].
[INC]/[DEC]
To move quickly upward through the available Patches:
Hold down [INC] and press [DEC]. Alternatively, hold down
[SHIFT] and press [INC].
To move quickly downward through the available
Patches:
Hold down [DEC] and press [INC]. Alternatively, hold down
[SHIFT] and press [DEC].
When you hold down [INC] or [DEC], you may eventually
arrive at the beginning (001) of the selected bank (A–H). To
continue selecting Patches, release and then press the desired
[INC] or [DEC] button again.
Selecting Patches by Category
(Patch Finder)
The XV-5080's "Patch Finder" allows you to quickly find any
Patch.
1. Press the [PATCH] button, lighting the indicator.
2. Press the [PATCH FINDER] button, lighting the
indicator.
The categories will appear in the PATCH PLAY page.
fig.01-003.e_70
You can press [ ]/[ ] to select the desired category.
At this point, you can select patches within the currently
selected category, either by rotating the VALUE dial, or by
using the [INC]/[DEC] button.
Chapter 1 Selecting and Playing a Sound
If you want to get even more information, carry out the
following operation.
3. Press the VALUE dial.
The Group List window will appear.
4. Rotate the VALUE dial to select a group.
5. Press [F6 (Select)] to call up the Category List window.
6. By rotating the VALUE dial, move the cursor to the
desired Patch, and then press [F6 (Select)].
The Patches of the selected category will be displayed in
sets of 10.
ig.01-003a.e_70
7. Pressing the [VOLUME] knob (PHRASE PREVIEW)
allows you to audition the selected Patch.
8. Press the VALUE dial (SOUND LIST) to return to the
PATCH PLAY page.
19