Error Messages - Roland XV-5080. Owner's Manual

Error Messages

If there has been a mistake in operation, or if the XV-5080 is
unable to continue processing as you directed, an error
message will appear in the display. Take the appropriate
action for the displayed error message. This section gives the
error messages in alphabetical order.
All Data on the Drive Will Be Lost.It
Will Take a Long Time.Are You Sure?
Condition: When you execute a Full Format, all data on the
disk will be lost. Also, a substantial length of
time is required for a full format. Is it OK to
execute the operation?
Action: To cancel the operation, press [F1 (CANCEL)].
To execute the full format, press [F6 (FORMAT)].
All Data on the Drive Will Be Lost.Are
You Sure?
Condition: When you execute a Quick Format, all data on
the disk will be lost. Is it OK to execute the
operation?
Action: To cancel the operation, press [F1 (CANCEL)].
To execute the full format, press [F6 (FORMAT)].
Battery Low
Situation: The internal backup battery that is preserving
the contents of user memory has run down.
Consult your dealer or a nearby Roland service
Action:
station to have the battery replaced.
Cannot Find Target File!
Condition: The performance specified for Auto Load was
not found.
Action 1: Make sure that the drive you specified for Auto
Performance Load is connected.
Action 2: In the case of a Zip disk, insert it into the drive.
Dest Disk Incorrect!
Cause: The media is of a format that cannot be written
by the XV-5080.
Action: Prepare media of a format that the XV-5080 is
able to write.
Disk Full!
The media is full.
Cause:
Action: Either delete unneeded files (p. 198), or prepare
another media.
Disk Not Ready!
Cause: The media is not ready.
Action: Insert another media.
DISK, Read Error!
Situation: An error occurred during read of the disk.
Action: This disk cannot be used.
DISK, Write Error!
Situation: An error occurred during writing to the disk.
This disk cannot be used.
Action:
File Format Error
The XV-5080 cannot handle this file.
Situation:
File I/O Error
It was not possible to save/load a file.
Situation:
Action: Try the operation once again. If the same
message appears, that file has been damaged.
Delete the damaged file.
FILE NAME DUPLICATE, File (file name)
Already Exists!
Situation: A folder with the same name already exists.
Action: Delete the file bearing the same name from the
disk, and if overwriting and saving the data,
merely save the file. If you do not want to delete
the file with the same name from the disk, either
save the file with a different name or save it to a
different disk.
235