Basic operation
Selecting a Photo Patch and playing back the image
Now we're actually going to play back an image using the CG-8.
First, select a "Photo Patch" to play back as the background image.
Selecting a Photo Patch
fig.front02.e.eps
1
Press the [PHOTO PATCH] pad.
The [PHOTO PATCH] pad will light.
Of visual pads [1]–[16], those for which a Photo Patch has been saved will light.
2
Press one of the lit visual pads [1]–[16] to select a patch.
The selected Photo Patch will begin playing. The display panel will indicate the bank
and number of that Photo Patch.
Switching banks and selecting a Photo Patch
1
To switch banks, hold down [PHOTO PATCH] and press a visual pad [1]–[8].
While you continue holding down the [PHOTO PATCH] pad, the visual pad of the
currently selected bank number will blink.
2
When you take your finger off the [PHOTO PATCH] pad, visual pads [1]–[16] in
which a Photo Patch is saved will light.
3
Press one of the lit visual pads [1]–[16] to select a patch.
The selected Photo Patch will begin playing. The display panel will indicate the bank
and number of that Photo Patch.
32
[PHOTO PATCH] pad
Visual pads [1]–[16]
For details on creating and
saving a Photo Patch, refer
to "Creating a Photo
Patch" (p. 62).
The Photo Patch will not
change if you press a
visual pad that is not
illuminated (i.e., a pad to
which no Photo Patch has
been assigned).