Table of Contents
Advertisement
MIDI
Message
MIDI RxError!
MIDI Buffer Full!
MIDI Offline!
Protect
Message
Protected Pad Bank!
Protected Pattern!
Other
Message
No Backup Data!
Empty Pad!
Recommended Memory Cards
As of the date of writing, the following memory cards have been tested by Roland and found to operate correctly with the
SP-606.
Maker
DELKIN DEVICES
LEXAR
Memorex
PNY TECHNOLOGIES
PQI (Power Quotient International)
SanDisk
SST (Silicon Storage Technology, Inc.)
vivanco
hama
HAGIWARA SYS-COM
HITACHI
Explanation
The received MIDI message was invalid.
Too many MIDI messages were received at the
same time and could not be successfully pro-
cessed.
There is a problem with the MIDI cable or USB
cable connection.
Explanation
The operation cannot be executed because Bank
Protect is turned on.
The operation cannot be executed because the
preloaded pattern protect setting is turned on.
Explanation
You selected a backup file that contains no data.
You selected a pad that contains no sample.
Model number
DDCFFLS-064 (eFilm) (64 MByte)
CF*** 8X USB (***: card capacity)
THNCF064MMA (64 MByte),
THNCF128MBA (128 MByte)
THNCF064MBA (P-CF064-RF) (64 MByte),
THNCF128MBA (P-CF128-RF) (128 MByte)
FC128 (Hi-Speed) (128 MByte)
ultra series
SST48CF032 (32 MByte)
FC032 (CFC F32) (32 MByte)
THNCF128MMA (128 MByte),
FC128 (Hi-Speed) (128 MByte)
V series,
Z series
C6 series
Message Lists/ Recommended Memory Cards
Action
Make sure that the MIDI device connected to the
SP-606 is operating correctly.
Reduce the amount of MIDI messages being sent
to the SP-606.
Check whether the MIDI cable or USB cable has
been disconnected or broken.
Action
Either use a bank that is not protected, or defeat
the Bank Protect setting. (p. 31)
Either use a pattern that is not protected, or de-
feat the Protect setting. (p. 58)
Action
Select a backup file that contains data, and exe-
cute the operation again. (p. 70, p. 71)
Select a pad that contains a sample, and execute
the operation again.
91
Advertisement
Table of Contents
