Table of Contents
Advertisement
Chapter 6. Pattern Editing
Preloaded Pattern Protect
1.
Go to the Pattern Play screen (p. 15).
2.
Press [MENU] to get the Top Menu screen.
3.
Move the cursor to the "1:SYSTEM" line, and press [ENTER].
The SYSTEM screen will appear.
4.
Press [F1] (CONFIG).
5.
Press [
6.
Turn the VALUE dial or use [DEC][INC] to change the setting to
WRITABLE.
Preloaded pattern protection will be turned off.
If you don't want to edit or delete the preloaded patterns, leave this setting at PROTECT.
7.
Press [EXIT] to return to the Play screen.
Changing the Pattern BPM (Tempo)
1.
Go to the Pattern Play screen (p. 15).
2.
Turn the VALUE dial or use [DEC][INC] to select the pattern you want
to edit.
You can also choose a pattern from the pattern list (p. 24).
3.
Press [F2] (EDIT) to get the PATTERN EDIT screen.
4.
Press [BPM] to get the PATTERN BPM screen.
The BPM specified for that pattern is displayed.
5.
Turn the VALUE dial or use [DEC][INC] to change the BPM (40.0–
200.0).
The BPM will change in steps of one.
6.
Press [EXIT] to return to the Play screen.
58
"Preloaded patterns" are the patterns that are loaded into internal memory when the SP-606 is
shipped from the factory. Patterns 1–40 are preloaded. If the preloaded patterns are protected, a lock
icon is displayed at the left of the screen for the corresponding patterns in the pattern list (p. 24).
When the SP-606 is shipped, the Protect setting is turned on for the preloaded patterns. If you
attempt to edit or delete a preloaded pattern in this state, the message "Protected!" will appear, and
you will be unable to edit or delete the pattern unless you turn off the Protect setting.
] to move the cursor to the "Preload Ptn" line.
You can change the BPM in steps of 0.1 by holding down
[FUNC] and turning the VALUE dial.
Advertisement
Table of Contents
