Table of Contents
Advertisement
Storing Track Mute Settings in a Pattern
1.
Go to the Pattern Play screen (p. 15).
2.
Turn the VALUE dial or use [DEC][INC] to select the pattern you want to edit.
You can also select a pattern from the pattern list (p. 24).
3.
Press [F2] (EDIT) to get the PATTERN EDIT screen.
The upper line of the screen will indicate "Track Mute."
4.
Use [
][
the VALUE dial or use [DEC][INC] to add or remove a check mark.
Tracks with a check mark are muted. The mute status for each track is
stored in the pattern.
5.
Press [EXIT] to return to the Play screen.
Microscope Editing
You can use Microscope editing to make detailed changes in the performance data of a pattern.
Basic Procedure for Microscope Editing
1.
Go to the Pattern Play screen (p. 15).
2.
Turn the VALUE dial or use [DEC][INC] to select the pattern you want to edit.
You can also choose a pattern from the pattern list (p. 24).
3.
Press [F2] (EDIT) to get the PATTERN EDIT screen.
4.
Press [F1] (MICRO) to get the MICROSCOPE EDIT screen.
5.
Press TRACK [1]–[4] to select the track you want to edit.
6.
Use [
][
data you want to edit.
7.
Use [
][
From the left, the parameters are Pad (pad bank number - pad number; 1-
1–32-16), Velocity (the force with which you strike the pad; 1–127), and Gate (note duration; 1–65535).
8.
Turn the VALUE dial or use [DEC][INC] to edit the parameter value.
9.
Repeat steps 5–8 to continue editing.
10. When you are finished, press [EXIT].
][
][
] to move the cursor to Track 1–4, and turn
You can also use TRACK [1]–[4] to add or remove check
marks in the "Track Mute" screen.
] to move the cursor to the location of the performance
] to select the parameter you want to edit.
You can execute Undo/Redo by holding down [FUNC] and pressing [
Chapter 6. Pattern Editing
] (Top) (p. 15).
59
Advertisement
Table of Contents
