Table of Contents
Advertisement
Copying Files or Folders via USB
Here's how you can copy files or folders between a drive on your computer and a memory card inserted in the
SP-606.
1.
Make the USB connection (p. 83).
2.
Insert a memory card into the card slot (p. 22).
3.
Press [MENU] to get the Top Menu screen.
4.
Use [
][
and press [ENTER].
The USB MASS STORAGE screen will appear.
5.
Press [ENTER] to enable the USB connection.
If you decide to cancel, press [F3] (EXIT).
Windows users:
The SP-606's memory card will appear on Windows as a drive named "Removable Disk" inside My
Computer.
Macintosh users:
The SP-606's memory card will appear on the desktop as a drive icon showing the volume name of
the memory card.
6.
To copy the desired files or folders, drag and drop them between a drive on your computer and the
memory card drive shown in step 5.
7.
Terminate the USB connection.
Windows users:
Use the "Safely Remove Hardware" button shown in the taskbar at the bottom right of the screen to
terminate the connection with the SP-606. Then press [F3] (EXIT) or [EXIT] on the SP-606.
Macintosh users:
Drag the SP-606 drive icon into the trash. Then press [F3] (EXIT) or [EXIT] on the SP-606.
Before using a memory card for the first time, you must format it on the SP-606 (p. 67). The SP-606
will not recognize a memory card that was formatted by another device.
] to move the cursor to the "5:USB Mass Storage" line,
If a memory card is not inserted, a message of "Card Not Ready!" will appear.
Do not modify, move, or delete any files or folders in the ROLAND folder of the memory card drive.
The SP-606 will become unable to recognize the memory card if you do so.
Chapter 13. About USB
85
Advertisement
Table of Contents
