Table of Contents
Advertisement
Chapter 13. About USB
When the SP-606 is connected to your computer via USB, it can send and receive MIDI messages, audio signals,
files, and folders. The operating systems that can be used will depend on your setup, as shown in the table below.
Functionality
Using the P606 application
Transmitting/receiving audio and MIDI
Reading/writing memory card data
Installing the USB Driver
In order to take full advantage of the SP-606's capabilities, you will need to install the included USB driver in your
computer.
Windows XP/2000 users:
From the "DRIVER/FACTORY DATA CD-ROM" (included), open
"DRIVER\USB_XP2K\README_E.HTM," and install the USB driver as directed in the "Installation"
procedure.
Windows Me/98 users:
From the "DRIVER/FACTORY DATA CD-ROM" (included), open
"DRIVER\USB_ME98\README_E.HTM," and install the USB driver as directed in the
"Installation" procedure.
Mac OS X users:
From the "DRIVER/FACTORY DATA CD-ROM" (included), open "DRIVER\OSX\Readme_E.htm,"
and install the USB driver as directed in the "Installation" procedure.
Mac OS 9 users:
From the "DRIVER/FACTORY DATA CD-ROM" (included), open "DRIVER\OS9\Driver E (Mac OS
9)\Readme_E.htm," and install the USB driver as directed in the "Installation" procedure.
Making the USB Connection
1.
Use a USB cable to connect the SP-606 to your computer.
2.
Turn on the power of the SP-606 (p. 21).
3.
Start up your computer.
The SP-606's power must be off when you connect or disconnect the USB cable. Never connect or
disconnect the USB cable or turn off the power while data is being transferred or while P606 is
running.
The P606 application runs only on Windows XP/2000.
In order to use the included P606 sequencer application for Windows, and to take full advantage of
the SP-606's capabilities, you will need to install the included USB driver before you continue with
the procedure below (p. 83).
To change the type of USB driver you are using, you will need to change the "Vender Driver"
setting (p. 84) before starting up your computer.
Operating System
Windows XP/2000
Windows 98 or later, Mac OS 9.0 or later, Mac OS X 10.2 or later
Windows Me/2000/XP, Mac OS 9.0.4 or later
83
Advertisement
Table of Contents
