Inserting And Removing A Memory Card; Inserting A Memory Card; Removing A Memory Card After Shutdown - Roland SP-606 Owner's Manual

Inserting and Removing a Memory Card

Inserting a Memory Card

1.
Insert the memory card into the card slot located on the front panel.

Removing a Memory Card after Shutdown

1.
Go to the Play screen (p. 15).
2.
Hold down [FUNC] and press [EXIT] (SHUTDOWN) to get the SHUTDOWN screen.
3.
Press [F3] to shut down.
When you have returned to the Play screen, it is safe to remove the memory card.
If you decide not to shut down, press [F2] (CANCEL).
4.
Press the eject button located beside the front panel card slot. A portion of the card will protrude, allowing
you to grasp the card and pull it out.
22
You can insert a memory card whether the SP-606 is turned on or off.
Carefully insert the Memory card all the way in-until it is firmly in place.
When using a memory card for the first time, you must format it on the SP-606. (p. 67)
Memory cards formatted by another device will not be recognized by the SP-606.
If the SP-606 is powered up, you must shut it down before removing the memory card. If you
remove the card without shutting down, you risk damaging the internal memory or the contents of
the memory card.
After shutdown, a memory card will not be detected even if it is present in the card slot. It will be
detected when you remove the memory card from the slot and re-insert it.